Adhesion of fasteners

  1. Bollhoff United Kingdom >
  2. Fasteners >
  3. Special fasteners >
  4. Thread technology >
  5. Adhesion of fasteners ONSERT®

Safe adhesion without loss of performance

ONSERT® technology allows adhesion of different fasteners to diverse materials.


An efficient connection

Böllhoff, as a specialist in mechanical joining technology, and DELO, as a specialist for intelligent bonding technology, have together developed a new fastening system.
It’s the ONSERT® technology – quick bonding of fasteners without loss of performance.

Your benefits

  • Optimised design ensures distortion-free surfaces; ideal where close tolerance or visual requirements are important. Fastening elements do not become apparent on the visible side through
  • Heat input such as it happens during welding and heat curing
  • Processing parameters independent of customer component
  • Full mechanical load capacity immediately after irradiation (no post-crosslinking)
  • Short curing times (< 5 sec)



There are two product families in the DELO range of adhesive products that are suitable for ONSERT® adhesion.


  • Light-curing acrylate
  • Curing in less than 10 seconds
  • Universal adhesion to various substrates
  • Application specific mechanical properties (ultimate elongation, TG, Young's modulus)


  • 2K-acrylate plus light curing
  • Fixing by light in 4 seconds, technical strength after 60 minutes
  • Temperature range from -40 °C to +120 °C

Bonding process

1. Dispensing

ONSERT® bonding process – 1. Dispensing

2. Joining

ONSERT® bonding process – 2. Joining

3. Curing

ONSERT® bonding process – 3. Curing

Product types

ONSERT® – The product range

  • ONSERT® Basic – surface connection

    ONSERT® basic – surface connection

    A transparent plastic sheath is applied to fasteners. The geometry provides for sufficient bonding surface.

  • ONSERT® plus – ripp connection

    ONSERT® plus – ripp connection

    The fastening elements are over moulded with transparent plastic (adhesive dome) and are then fitted using light-curing adhesive. Adhesive domes can be produced in various designs, e.g. with internal threads, bolt threads, ball studs or snap connections.

Download Version Language Type/Size
Quick and process-reliable bonding of fastening
elements with light-curing adhesives
0250/16.02 English PDF / 481 KB

If you are not able to open the document, please install the Adobe Acrobat Reader.

Our partner DELO



You need any product information or support?

Das Teaser-Element 3 ist nicht definiert, obwohl im Teaser-Header angegeben.

ONSERT® Adhesion of fasteners


Copyright © 2013 Bollhoff Fastenings Ltd. and Bollhoff GMBH - UK DivisionSEO by Rocketfish Ltd